Ethernet Fiber Fibre
2011
Ethernet Fiber Fibre
![]() |
![]() Fiber Optic 10Gigabit Ethernet Network Adapter US $791.48
|
![]() 313879 B21 HP NC 6170 ETHERNET 1GPS FIBER LC PC X 2 US $150.00
|
![]() 313585 001 HP NC 6170 ETHERNET 1GPS FIBER LC PC X 2 US $150.00
|
![]() Fiber Optic Gigabit Ethernet Card US $189.72
|
![]() ALLIED TELESIS AT MC13 60 UTP RJ45 TO FIBER ST ETHERNET MEDIA CONVERTER US $123.05
|
Portugal Telecom demos 100 Gbps over its optical fiber network
Portugal Telecom has demonstrated a 100-Gbps connection between Lisbon and Oporto using equipment from Alcatel-Lucent (Euronext Paris and NYSE: ALU). So this is about the entire world's communications. very important. So lets start with what is the optical fiber.
From wikii, An optical fiber is a thin, flexible, transparent fiber that acts as a waveguide, or "light pipe", to transmit light between the two ends of the fiber. The field of applied science and engineering concerned with the design and application of optical fibers is known as fiber optics.
The demonstration showcased end-to-end optical/IP 100-Gbps connectivity across an existing active DWDM link covering more than 400 km. The link used Alcatel-Lucent's 1626 Light Manager enhanced with 100G coherent technology and the Alcatel-Lucent 7750 Service Router equipped with 100 Gigabit Ethernet cards for IP/MPLS routing and services..
"In keeping with industry trends, we're expecting that video will account for well over half of our consumer traffic. This kind of demand requires higher-speed, higher-capacity technology," said Alfredo Baptista, Portugal Telecom CTO. "This fully integrated IP/optical 100G connection, together with the previously announced evolution of our fiber access network with GPON and 10GPON technologies [see "Portugal Telecom, Alcatel-Lucent to trial symmetrical 10G GPON"], is one further step towards a Next Generation Network with full end-to-end IP connectivity with high quality standards and very high speeds, being these unique characteristics not replicable on other type of technologies.
Portugal Telecom recently reaffirmed its commitment to invest in its optical fiber splicer network to the customer home with the objective of covering another 600,000 houses in addition to the over 1 million homes already serviced by the network. The network expansion will use about 300,000 km of fiber and shall involve approximately 1500 people between PT collaborators and external suppliers. Once complete, PT's fiber network will reach over 50% of homes in Portugal.
"The upgrading of service provider networks to 100G will be a major focus and business area for several years to come and these speeds will become the new currency of IP and optical networks," said Adolfo Hernandez, president of Alcatel-Lucent's activities in EMEA. "This demonstration brings to light the years of investment PT has made on future proof optical and IP infrastructure which is compatible with today's 100G technology."
About the Author
|
|
HP Ethernet 10Gbps Fibre Channel 443756B21 $1419.42 HP Ethernet 10Gbps Fibre Channel 443756B21 |
|
|
Allied Telesyn Ethernet 1Gbps Fibre Network Adapter $175.96 Allied Telesyn Ethernet 1Gbps Fibre Network Adapter |
|
|
Emulex Ethernet GigaBit Fibre PCI Host FE102001707B $115.3 Emulex Ethernet GigaBit Fibre PCI Host FE102001707B |
|
|
Fibre Channel Over Ethernet $79.66 High Quality Content by WIKIPEDIA articles Fibre Channel over Ethernet (FCoE) is an encapsulation of Fibre Channel frames over Ethernet networks. This allows Fibre Channel to use 10 Gigabit Ethernet networks while preserving the Fibre Channel protocol. The specification, supported by a large number of network and storage vendors, was developed by the FCBB5 working group of T11. On June 4, 2009, T11 approved the FCBB5 Draft Standard and forwarded it to INCITS for the publication process as an ANSI standard. The ecosystem of FCoE standards includes pieces from INCITS T11, IEEE and IETF.FCoE maps Fibre Channel natively over Ethernet while being independent of the Ethernet forwarding scheme. The FCoE protocol specification replaces the FC0 and FC1 layers of the Fibre Channel stack with Ethernet. By retaining the native Fibre Channel constructs, FCoE allows a seamless integration with existing Fibre Channel networks and management software. Author: Surhone, Lambert M./ Tennoe, Mariam T./ Henssonow, Susan F. Binding Type: Paperback Number of Pages: 118 Publication Date: 2010/09/13 Language: English Dimensions: 6.00 x 9.02 x 0.28 inches |
|
|
Tripplite / 20M FIBER OPTIC/FIBRE CHANNEL / N520-20M $59.54 Tripplite - 20M FIBER OPTIC/FIBRE CHANNEL - N520-20M |
|
|
Compaq Fibre Channel 2Gbps Fiber PCI64 254456B21 $118.86 Compaq Fibre Channel 2Gbps Fiber PCI64 254456B21 |
|
|
IBM 44X1940 QLogic Ethernet Fibre Channel Host Bus Adapter for IBM BladeCenter $762.99 4 4 oz 4 x Fiber Channel 44X1940 44X1940 QLogic Ethernet Fibre Channel Host Bus Adapter for IBM BladeCenter 6.30" Height x 4.90" Width x 0.50" Depth 8.50 Gbps Fibre Channel Host Bus Adapter IBM IBM Corporation PCI Express Plug-in Card www.ibm.com |
|
|
Cisco Multiplexer 15530 Ethernet 1Gbps Fibre Channel 8-Ports 15530FCGE8P $1696.35 Cisco Multiplexer 15530 Ethernet 1Gbps Fibre Channel 8-Ports 15530FCGE8P |
|
|
HP Ethernet 1000Mbps NC310F Fibre Channel Server Adapter 367983-001 $40.56 HP Ethernet 1000Mbps NC310F Fibre Channel Server Adapter 367983-001 |
|
|
HP NC310F Ethernet 1000Mbps Fibre Server Adapter NC310F $30.1 HP NC310F Ethernet 1000Mbps Fibre Server Adapter NC310F |
|
|
Emulex LightPulse Ethernet 2.12Gbp Fibre Channel PCI-X LP1005DCCM2 $86.73 Emulex LightPulse Ethernet 2.12Gbp Fibre Channel PCI-X LP1005DCCM2 |
|
|
Emulex Ethernet 1Gbps Fibre SC PCI64 LP8000F1 LP8000-F1 $200 Emulex Ethernet 1Gbps Fibre SC PCI64 LP8000F1 LP8000-F1 |
|
|
IBM Mcdata Switch Module Ethernet Fibre Channel 6-Ports 32R1790 $225.62 IBM Mcdata Switch Module Ethernet Fibre Channel 6-Ports 32R1790 |
|
|
IBM GigaBit Ethernet-SX PCI-X Adapter (Fibre) 52P8641 $50.12 IBM GigaBit Ethernet-SX PCI-X Adapter (Fibre) 52P8641 |
|
|
Transition Networks Transceiver Ethernet 10/100Mbps MultiMode Fibre TNSFPOC3M $140.39 Transition Networks Transceiver Ethernet 10/100Mbps MultiMode Fibre TNSFPOC3M |
|
|
Finisar Ethernet 1000Mbps 1G/2G Fibre Channel mini-GBIC FTRJ8519P1BNL $67 Finisar Ethernet 1000Mbps 1G/2G Fibre Channel mini-GBIC FTRJ8519P1BNL |
|
|
Transition Media Converter Ethernet 10/100/1000Mbps RJ-45 Fibre CGETF1013110 $447.3 Transition Media Converter Ethernet 10/100/1000Mbps RJ-45 Fibre CGETF1013110 |
|
|
Finisar Transceiver Ethernet 1Gbps GBIC Fibre Channel FTR85193D $31.66 Finisar Transceiver Ethernet 1Gbps GBIC Fibre Channel FTR85193D |
|
|
EMC Emulex LightPulse LP21000 Fibre Channel Host Bus Adapter $1419.99 1 1 x LC Fibre Channel 108 ft 62.5 µm Fiber 4.38" Height x 9" Width 984 ft 50 µm Fiber Emulex LightPulse LP21000 Fibre Channel Host Bus Adapter 3M Cable TUV certified to EN60950-1 FCC rules, Part 15, Class A ICES-003, Class A VCCI, Class A MIC (Korea), Class A BSMI (Taiwan), Class A The Emulex LightPulse LP21000 Fibre Channel Host Bus Adapter is intelligent multi-protocol adapter that provide host LAN and Fibre Channel SAN connectivity over 10Gb/s Ethernet using Fibre Channel over Ethernet (FCoE) and Enhanced Ethernet functionality. Unrivaled scalability and industry-leading virtualization support make dual-port LP21002 CNA ideal solutions for server I/O consolidation. Class 3 EMC EMC Corporation Emulex LightPulse LP21000 Fibre Channel Host Bus Adapter FC-AL-2 FC-FLA FC-FS FC-GS-4 FC-PH3 FC-PI-2 FC-PLDA FC-Tape FCP-2 Fiber Fibre Channel Host Bus Adapter LP21000 LP21000-C-E LightPulse N_Port PCI-X 1.0a RoHS Yes www.emc.com |
|
|
Dell Giigabit Ethernet Fibre 66MHz 1.25 6BD Ethernet 850NM Adapter 55HHP $34.5 Dell Giigabit Ethernet Fibre 66MHz 1.25 6BD Ethernet 850NM Adapter 55HHP |
|
|
HP Short Wave B-series Fibre Channel SFP (mini-GBIC) Module $193.99 1 1 x Fiber Channel 4 Gbps 4 Gbps Gigabit Ethernet AJ715A Data Networking Fiber Channel Fiber Fiber Channel HP Hewlett-Packard Pack SFP (mini-GBIC) Short Wave B-series Fibre Channel SFP (mini-GBIC) Module www.hp.com |
|
|
Cisco Fibre Channel SFP+ - 1 x Fiber Channel - XFP DSSFPFC8GLW $1524.34 Cisco Fibre Channel SFP+ - 1 x Fiber Channel - XFP DSSFPFC8GLW |
|
|
Emulex Fibre Channel 2Gbps Fiber PCI-X LP10000M2 $23.1 Emulex Fibre Channel 2Gbps Fiber PCI-X LP10000M2 |
|
|
Emulex Fibre Channel 2Gbps Fiber PCI-X LP1050DCF2 $39.06 Emulex Fibre Channel 2Gbps Fiber PCI-X LP1050DCF2 |
|
|
Cisco Fibre Channel SFP+ 1 X Fiber Channel XFP DSSFPFC8GLW $905.35 Cisco Fibre Channel SFP+ 1 X Fiber Channel XFP DSSFPFC8GLW |
|
|
SUN Microsystems Switch 8-Ports Fibre Channel Fiber Optic 2-Pack X6746A $363.21 SUN Microsystems Switch 8-Ports Fibre Channel Fiber Optic 2-Pack X6746A |
|
|
8-Port Fibre Channel plus 8-Port 1 and 10 Gigabit Ethernet and FCoE Module - expansion module - 8 ports $8239.99 Cisco 8-Port Fibre Channel plus 8-Port 1 and 10 Gigabit Ethernet and FCoE Module - Expansion module - Fibre Channel 2Gb Fibre Channel 4Gb Fibre Channel FCoE 8Gb Fibre Chan |
|
|
Startech.com / RJ45 TO ST FIBER TO ETHERNET / MCM110ST2 $63.01 Startech.com - RJ45 TO ST FIBER TO ETHERNET - MCM110ST2 |
|
|
Startech.com / GIGABIT FIBER ETHERNET MEDIA / MCMGBSC055 $107.87 Startech.com - GIGABIT FIBER ETHERNET MEDIA - MCMGBSC055 |
|
|
Startech.com / RJ45 TO SC FIBER TO ETHERNET / MCM110SC2 $61.23 Startech.com - RJ45 TO SC FIBER TO ETHERNET - MCM110SC2 |
|
|
EMC 32-Ports Fiber Channel Ethernet Switch DS32M2 $1970 EMC 32-Ports Fiber Channel Ethernet Switch DS32M2 |
|
|
QLogic SANbox 5602 Fibre Channel Switch $5208.99 1 x RJ-45 10/100Base-T Management 1 x RS-232 Serial Management 1.70" Height x 17" Width x 20" Depth 15 lb 16 16 x Expansion Slot 16 x SFP (mini-GBIC) Unoccupied 1640 ft Multi-mode Fiber @ 2 Gbps 1U External 2 2.1 KB Payload 4.24 Gbps 4.24 Gbps Fibre Channel 50/62.5 µm Multi-mode Fiber 5600 5602 6.21 Mile Single-mode Fiber @ 2 Gbps 9 µm Single-mode Fiber 96 Port < 400 ns QuickTools web applet Enterprise Fabric Suite 2007 Command Line Interface API, GS-4 Management Server (including FDMI), SNMP, RADIUS, FTP, TFTP, SMI-S SANbox 5602 ets you start small, then scale with your company's needs using state of the art 10Gb Fibre Channel ¨stacking¨ technology typically found only in high end director products. As proven in the Ethernet world, stackable architectures cut costs and increase stability by providing a dedicated, highly expandable transport for aggregate ISL traffic eliminating the disruption, port waste, and management hassles associated with using regular device ports for inter switch links. It's like having the performance and hands off convenience of an expensive chassis switch without the cost overhead of a chassis. Cut-through Routing E_Port FC-AL FC-AL-2 FC-FG FC-FLA FC-GS FC-GS-2 FC-GS-3 FC-PH FC-PH2 FC-PH3 FC-SW-2 FC-Tape FC-VI FL_Port F_Port Fibre Channel Switch GL_Port G_Port HTTP Long-wavelength Laser Plug-in Module Point-to-Point QLogic QLogic Corp SANbox SANbox 5600 SANbox SB5602 Fiber Channel Switch SB5602-16A-E SNMP Short-wavelength Laser Switched Fabric Telnet Yes www.qlogic.com |
|
|
StarTechcom Fiber-to-Ethernet Media Converter $49.99 Extend an Ethernet network connection over a multimode fiber backbone with this media converter that converts 10Base-T or 100Base-Tx Ethernet signals and 100Base-FX optical signals over a distance of up to 1.2 miles. |
|
|
QLogic Ethernet and 8 Gb Fibre Channel Expansion Card (CFFh) for BladeCenter - host bus adapter - 4 ports $1074.99 QLogic Ethernet and 8 Gb Fibre Channel Expansion Card (CFFh) for IBM BladeCenter - Host bus adapter - PCI Express - Gigabit Ethernet 8Gb Fibre Channel - 4 ports - for BladeCe |
|
|
Cisco MDS-9148 Fibre Channel Switch $3766.99 1 x RJ-45 10/100/1000Base-T Gigabit Ethernet 1 x RJ-45 Console 1.77" Height x 17.17" Width x 18.90" Depth 16 16 x SFP+ 16 x SFP+ Installed 1U Desktop 2 2 x LC Fibre Channel 22 lb 2822 ft 32 Port 4 Gbps 9100 Configuration file management Call Home Port beaconing System LEDs SNMP traps for alerts FCC Part 15 (CFR 47) Class A ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS CISPR22 Class A VCCI Class A EN55024 KN24 EN50082-1 EN61000-3-2 EN61000-3-3 EN61000-6-1 CISPR24 NEBS GR-63-Core NEBS Level 3 GR-1089-Core NEBS Level 3 ETSI ETS 300 019 Storage Class 1.1 ETS 300 019 Transportation Class 2.3 ETSI 300 019 Stationary Use Class 3.1 UL 60950 -1 CAN/CSA-C22.2 No. 60950 -1 EN 60950 -1 IEC 60950 -1 AS/NZS 60950 IEC 60825 EN 60825 21 CFR 1040 MDS-9148 Multilayer Fabric Fiber Channel Switch Accessory Kit Zero-touch deployment with DHCP (in Cisco MDS 9000 NX-OS Software Release 5.1(0) or later) Cisco MDS 9000 Family CLI Quick Configuration Wizard Cisco Fabric Manager and Device Manager Cisco Fabric Manager Server (optional; requires Cisco Fabric Manager Server license) The Cisco MDS 9148 Multilayer Fabric Switch is a high-performance, flexible, cost-effective platform providing high-density, line-rate 8-Gbps ports for storage networking deployments in small, medium-sized, and large enterprise environments. The Cisco MDS 9148, based on a purpose-built "switch-on-a-chip" application-specific integrated circuit (ASIC), offers outstanding value by providing high-availability, security, and ease of use at a cost effective price in a compact one-rack-unit (1RU) form factor. With the flexibility to expand from 16 to 48 ports in 8-port increments, the Cisco MDS 9148 offers the densities required to scale from an entry-level departmental switch to top-of-the-rack switch to edge connectivity in enterprise SANs. The Cisco MDS 9148 delivers a nonblocking architecture, with all 48 1/2/4/8-Gbps ports operating at line rate concurrently. The Cisco MDS 9148 supports the Cisco Device Manager quick configuration wizard, which allows it to be deployed quickly and easily in networks of any size. Powered by Cisco MDS 9000 NX-OS Software, it includes advanced storage networking features and functions and is compatible with Cisco MDS 9500 Series Multilayer Directors and Cisco MDS 9100 and 9200 Series Multilayer Fabric Switches, providing transparent, end-to-end service delivery in core-edge deployments. Cisco Cisco Systems, Inc DS-C9148D-4G16P-K9 FC-AL FC-AL-2 FC-BB FC-BB-2 FC-BB-3 FC-DA FC-FLA FC-FS FC-FS-2 FC-GS FC-GS-3 FC-GS-4 FC-GS-5 FC-MI FC-PH FC-PH2 FC-PH3 FC-PI FC-PLDA FC-SB-2 FC-SB-3 FC-SP FC-SW-2 |
|
|
HP PCI-X 2GB Fibre Channel and GigaBit Ethernet MultiFunction Adapter A978460001 $23.77 HP PCI-X 2GB Fibre Channel and GigaBit Ethernet MultiFunction Adapter A978460001 |
|
|
HP PCI-X 2GB Fibre Channel and GigaBit Ethernet MultiFunction Adapter A9784AX $23.77 HP PCI-X 2GB Fibre Channel and GigaBit Ethernet MultiFunction Adapter A9784AX |
|
|
3Com Expansion Module Ethernet 10Mbps Fibre Optic 1-Port w/SW 3C12067 $255.47 3Com Expansion Module Ethernet 10Mbps Fibre Optic 1-Port w/SW 3C12067 |


US $580.00




























![Ortronics RJ45 Ethernet to Fiber TransOptix TX1000A ISA 10Base T\FL Convert 55]](http://www.besballtalk.com/images/e/380440014704_0.jpg)































































Comment