Besballtalk Office Phone System

Plugs Crimp Ends

Assembly of A Category 6 Shielded Solid Or Stranded RJ45 Plug With Cable Clip

Twisted pair cables such as CAT5, CAT5e, CAT6 and CAT6a cable are a low cost and easy installation alternative to traditional coax cables for transmitting KVM and AV signals.   KVM (keyboard-video-mouse) extenders via CAT5 may be used to remove computers from harsh or sensitive environments, or to restrict physical access to the computer. Video extension products such as VGA, DVI, S-Video or HDTV extenders via CAT5 are used to extend video displays. Each extender consists of two units - the local and remote units, which are interconnected using a CAT5/5e/6 cable.

This article focuses on the proper method for terminating a CAT6 shielded solid or stranded cable using standard tools and materials that are readily available.  With the proper use of the tools and a little practice you will be terminating CAT6 cables in no time.

Prepare the cable

You will first need CAT6 shielded cable (solid or stranded for the purposes of this article) cut to the desired length.  The cable can be terminated before or after installation, even if you have a long run to make.  Using a cable tester from VPI, the cable can be easily tested for continuity, crossed pairs and pinouts to make sure all connections have been made properly.     

Next you will need to make sure you have the correct plugs to terminate the cable with.  Different plugs are intended to different types of cable, whether you have solid or stranded connectors, flat or round cable, shielded or unshielded, and CAT5, 5e, 6, or 6a.   Be sure to use a plug suitable for your cable.

For tools you need a CAT5 wire stripper, wire cutters, RJ45 crimp tool (specially designed for RJ45 plug with cable clip), and a CAT5 cable tester.

Terminate the cable

First, slide the plug boot onto the cable, being sure to orient the boot such that the open side is towards the cut end of the cable.   Then carefully strip the jacketing from the cable to expose 1" of the insulated wire conductors and shield. Don't cut too deeply or you will knick the shield and wire insulation underneath.  If you just score the cable jacket and bend the wire in several directions to finish the break, the result will be a good problem-free cut.

Next, peel the foil shield insulation back onto the cable jacket and trim to within approximately ¼" of the jacket edge. Wrap the drain wire such that it is located at the bottom (locking-tab side) of the cable.    Do not remove any insulation from the conductors.

Trim the + shaped divider (an insulator core within some manufacturer's CAT6 cables, so this may or may not be present) that separates each of the twisted pair all the way back to the cut edge of the jacket.

Untwist the wires to within approximately 3/16" of the jacket edge (but not beyond) and arrange them according to TIA/EIA 568A or 568B standards.  For a CAT6 shielded RJ45 plug with cable clip, the RJ45 plug should include a spacer bar used to properly space the pairs of wires for insertion into the loading bar and plug.   Insert the wires into the spacer bar, (one twisted pair per space) with the "V" shaped split facing upwards and away from the jacket. Position the spacer bar as close to the jacket as possible.  The portion of untwisted wire should be inside the spacer bar.

Flatten and insert the remaining wire into the loading bar.   The loading bar has openings in it, one for each conductor.   The wires must be placed in the proper order for either the TIA/EIA 568A or 568B standard.  With the wires in the proper order, slide the loading bar (with the raised edge up and towards the spacer bar) all the way on until it touches the spacer bar.  Then trim off the excess wires that extend from the loading bar.

Insert the prepared cable into the RJ45 plug such that the loading bar is fully inserted and the cable jacket extends inside the plug.   Be careful not to scrape the foil shield with the cable clip as you insert the assembly.  The jacket and shield should extend at least ¼" into the plug for proper strain relief and shield connection.   Make sure the drain wire is positioned at the bottom of the connector as this is where it will see the greatest contact with the shield of the RJ45 plug.

Using the RJ45 crimp tool (make sure this tool is capable of crimping the cable clip), crimp the assembled termination to make it permanent.  Firmly squeeze the handles to set the contacts, crimp the cable clip and secure the plug.  Once crimped, the termination should be tight and impossible to remove.

Slide the rubber boot over the crimped connection and plug until it grabs the small teeth on the plug body.

Test the cable

Use the CAT5 cable tester to check your work.   The tester will indicate proper continuity (complete connection end-to-end), make sure the pairs have been matched up properly, and that the pinout is according to the selected wire standard.  If an end is wired incorrectly, the tester will indicate which end is incorrect.  Simply cut off the end and try again.

Be sure to see more articles about CAT5 cable termination available from VPI.   Other types of cable require slightly different procedures, so not all of the details for the cable you want to terminate will be covered in this article.

About the Author

Video Products Inc (http://www.vpi.us/) has an expanding headquarters located in Aurora, OH. Our company is focused on supplying the highest quality products to the tech-savvy home user and the IT professional. We have one goal at VPI - to make your life easier by providing connectivity products of exceptional quality and mixing them with friendly, knowledgeable service.

VPI cables have become known worldwide for delivering crisp and clear images with no signal degradation. As our product line has expanded, we have carried this dedication to quality and innovation through our wide variety of cables, adapters, hubs, switches and splitters - everything you need to connect your PC, MAC or SUN computer to the peripherals you prefer.

Replacement AMP RJ45 Network Crimp Plugs (100) $16.07 Highlights:Easily replace faulty or damaged RJ45 network plugs yourselfDirectly shipped from factory in retail boxHigh quality copper contacts100 pieces of RJ45 Network Crimp PlugsSpecification:Weight: 6.35 ozPackage Contents:100 x RJ45 Network crimp plugs

Replacement OEM RJ45 Network Crimp Plugs (20-pcs) $2.09 Highlights:Replacement OEM RJ45 network crimp plugsReplace your faulty or damaged RJ45 network crimp plugsRepairs your RJ45 network cableHigh quality RJ45 network crimp plugs at low priceSpecification:Brand: OEMConnector type: RJ45Dimensions: 0.87 in x 0.43 in x 0.59 inWeight: 1.27 ozPackage Contents:20 x OEM RJ45 Network crimp plugs​

BP2CRIMP Female Banana Plugs w/ Crimp Connectors $9.95 Female Banana Plugs with Crimp Connectors. For easy connection to CSRC power supplies. Type: Replacement Parts Color: Multi-Color Gender: Unisex Age: Adult

RJ45 Network Crimp Plugs Connectors (100 Pack) $5.05 Extremely high quality module plugs Gold plated leads for better data transmitting and higher signal strength

Gold-Plated Banana Plugs $15.99 OEM SYSTEMS IW-16PLUG GOLD-PLATED CRIMP-ON BANANA PLUGS, 16 PK

IDEAL Telemaster Crimp Tool $44.99 33-700 90 1 x Telemaster Crimp Tool 10 x 4-Position, RJ-11 Stranded Modular Plugs 10 x 6-Position, RJ-11 Stranded Modular Plugs 10 x 8-Position, RJ-45 Stranded Modular Plugs Blue Crimp Tool Crimping IDEAL IDEAL Industries, Inc Plastic Handle Steel Telemaster Telemaster Crimp Tool US www.idealindustries.com

TRENDnet Professional Crimp Tool $18.99 1 Year Precision ground Crimps two sizes of plugs Compact size, easy to handle Functions for 8P/RJ-45 and 6P/RJ-12, RJ-11 Ratchet mechanism to keep tool closed when not in use For your variety of network needs, TRENDnet has a tool specifically designed to maintain network accessories. Our professional crimp tool TC-CT68 crimps, strips, and cuts cable for 8 and 6 position modular plugs. The crimp tool offers reliable, easy-to-use, and affordable solution to meet immediate cutting needs. Our professional crimp tool delivers convenience at a very economical price. Crimp Tool Crimping Cutting Professional Crimp Tool Steel Stripping TC-CT68 TRENDnet www.trendnet.com

Steren Crimp Tool. Each $19.68 Manufacturer: Steren. Each. Crimp tools for flat/round-stranded modular plugs. Built-in cutting or cutting-stripping blades. Comfortable grip handles for reduced hand fatigue Product Type: Crimp tool Dimensions (WxDxH): 3 in x 1 in x 7.5 in Weight: 6.4 o

Ultra ULT40469 Crimp Tool $23.99 Ultra's convenient 3-in-1 Crimp Tool is the easiest way to manage your network cables. It's versatility is unmatched and strives to accommodate at an amazingly cost-effective price. Moreover it cuts and strips round (UTP Cat 5) and flat voice cable. Easily, crimps RJ45, RJ11/12 handset plugs. Features a reliably comfortable handle that's lightweight and durable. Comfortable Grip Crimp Tool Crimping Cutting Stripping ULT40469 ULT40469 3-in-1 Crimp Tool Ultra Ultra Products www.ultraproducts.com

Generic 115 2157 Professional Crimp Tool RJ45/11/12 $49.7 Professional Crimp Tool RJ45/11/12. For cutting stripping and crimping of both 6P and 8P modular plugs. Will crimp 8P8C/RJ45 6P6C RJ12 6P4C/RJ11 and 6P2C plugs. Satisfaction Ensured.

Steren Modular-Plug Crimp Tools $8.99 300-508 6.40 oz 7.50" Height x 4.25" Width x 1" Depth Crimp Tools for Flat/Round-Stranded Modular Plugs. Built-In Cutting or Cutting-Stripping Blades. Plastic or Hardened Steel Construction. Comfortable Grip Handles for Reduced Hand Fatigue. Suitable for 4x4, 6x4, 8x8 Plugs Crimp Tool Crimping Cutting Modular-Plug Crimp Tools Plastic Handle Steren Steren Electronics, LLC Stripping www.steren.com

Bar Ends $17.95 ODI Bar Ends Add a little color to your ride and protect your grips and handlebars with the ODI Bar Ends. Manufactured out of aluminum and then anodized in four colors, these bar ends add a bit of style to your ride. Anodized aluminum finish Available in 4 colors Expanding double-wedge designed plugs Fits handlebars with an inside diameter of 14mm - 19mm Sold in pairs Made in the USA

Tc-Ct68 - Trendnet Professional Crimp Tool $19.28 our Professional Crimp Tool Tc-ct68 Crimps, Strips, And Cuts Cable For 8 And 6 Position Modular Plugs. The Crimp Tool Offers Reliable, Easy-to-use, And Affordable Solution To Meet Immediate Cutting Needs. Our Professional Crimp Tool Delivers Convenience At A Very Economical Price. [TCCT68] UPC: 710931401097 UNSPC: 27111518 11L x 5W x 1H 0.7 LB 0.03 Cubes

Cables To Go Crimp Tool $29.99 04601 7.50" Length 8.80 oz 90 An economic solution for constructing your own cables. This tool is lightweight and durable with a hardened steel frame and black oxide finish. This stranded wire cutter/stripper crimps 6P6C and 6P4C modular telephone plugs. Black Cables To Go Crimp Tool Crimping Cutting RJ11/RJ12 Modular Crimping Tool Steel Frame www.cablestogo.com

Dynex 20-Piece CAT5/5e Crimp-on Modular Plugs $5.99 Secure your data transmission and networking connections with ease.

OEM RJ45 Network Crimp Plugs (20-pcs) $2.21 - Gold plated leads for better data transmitting and higher signal strength- Shiny Copper built in relecting high quality- Designed For: Voice/Data applications - Compatibility: Flat / Stranded Cable- Quantity: 20

ICC ICACSCT460 ICACSCT460 4/6 Modular Crimp $42.91 ICACSCT460 4/6 Modular Crimping Tool Modular crimping tool Designed for use with telephone plugs Features ratchet mechanism for ease of use For 4 position and 6 position plugs Blue handle Steel frame construction Crimp up to two plugs at a time

All-in-One Modular Crimp Tool $207.99 Install modular plugs on UTP and telephone cable.

Crimp Beads silver 2.5 mm $1.61 Crimp beads yield a secure and professional start and finish for beaded designs. They have an ultra-smooth finish and come in plated colors. They protect and secure the beading material and create nicely finished ends that don't need to be hidden. You can use beads as spacers in beaded designs. Sizes listed below are outside diameter measurements.

Crimp Beads gold 2.5 mm $1.61 Crimp beads yield a secure and professional start and finish for beaded designs. They have an ultra-smooth finish and come in plated colors. They protect and secure the beading material and create nicely finished ends that don't need to be hidden. You can use beads as spacers in beaded designs. Sizes listed below are outside diameter measurements.

Crimp Beads black 2.0 mm $2 Crimp beads yield a secure and professional start and finish for beaded designs. They have an ultra-smooth finish and come in plated colors. They protect and secure the beading material and create nicely finished ends that don't need to be hidden. You can use beads as spacers in beaded designs. Sizes listed below are outside diameter measurements.

Crimp Beads black 2.5 mm $1.61 Crimp beads yield a secure and professional start and finish for beaded designs. They have an ultra-smooth finish and come in plated colors. They protect and secure the beading material and create nicely finished ends that don't need to be hidden. You can use beads as spacers in beaded designs. Sizes listed below are outside diameter measurements.

Crimp Beads silver 1.3 mm $2 Crimp beads yield a secure and professional start and finish for beaded designs. They have an ultra-smooth finish and come in plated colors. They protect and secure the beading material and create nicely finished ends that don't need to be hidden. You can use beads as spacers in beaded designs. Sizes listed below are outside diameter measurements.

Crimp Beads gold 2.0 mm $2 Crimp beads yield a secure and professional start and finish for beaded designs. They have an ultra-smooth finish and come in plated colors. They protect and secure the beading material and create nicely finished ends that don't need to be hidden. You can use beads as spacers in beaded designs. Sizes listed below are outside diameter measurements.

Paladin Tools 70009 DataShark DIY Crimp Bundle $52 Type: Crimp Bundle. Crimp style: 2822 AWG (0.08 0.34 mm) flat or round; solid or stranded telephone amp; data cables. Connector style: Western Electric/Stewart Stamping (WE/SSstyle). Kit includes all the tools you need along with the connectors. 10 RJ45 Cat5e data plugs for solid round cable. 10 RJ11 phone plugs for solid round cable.

300-508 - Steren Modular-Plug Crimp Tools $15.25 crimp Tools For Flat/round-stranded Modular Plugs. Built-in Cutting or Cutting-stripping Blades. Plastic or Hardened Steel Construction. Comfortable Grip Handles For Reduced Hand Fatigue. [T07845] UPC: 884645107894 UNSPC: 27111518 7.25L x 4.25W x 1H 0.36 LB

PETRA 300568 HeavyDuty RJ45 Steel Crimp Tool $36.13 6 x 4 / 8 x 8 die crimp tool. Suitable for 6 x 4 6 x 6 8 x 8 plugs. Hardened steel Black oxide finish. Builtin cutting/stripping blades.

Steren 300508 Modular Plug Crimp Tools $27.57 Crimp Tools for Flat/RoundStranded Modular Plugs. BuiltIn Cutting or CuttingStripping Blades. Plastic or Hardened Steel Construction. Comfortable Grip Handles for Reduced Hand Fatigue.Suitable for 4 x 4 6 x 4 and 8 x 8 plugsBuiltin stripping blade

Ez Crimp Sterling Sliver S-hook Clasp $15.75 The EZ Crimp, true to its name, is the easiest crimp end on the market. This S-hook clasp allows your to create fabulous jewelry with ease.Includes one (1) S-hook claspSterling silver Crimps onto wire with pliersCreates professional-looking ends

Such As It Ends $6 Such As It Ends - Ludo

Crimp tool $45.99 Crimp tool

RJ45 Network Crimp Plugs (100-pcs retail box set) $5.55 - Gold plated leads for better data transmitting and higher signal strength- Shiny Copper built in relecting high quality- Designed For: Voice/Data applications - Compatibility: Flat / Stranded Cable- Quantity: 100

Handlebar End Plugs $31.99 Renthal Handlebar End Plugs Renthal end plugs are designed for road use and come in a variety of colors to match your Renthal 7/8" handlebars. They also include an adapter which allows the end plugs to be used with thinner gauge steel bars. Features: CNC precision machined from 2011T3 aluminium alloy Ultralight design. (Please note they are not a bar end weights designed to dampen vibration) Includes an adapter for use with steel bars *Note: Fits applictations with 7/8" Bar ends

46108 - Fiberboard Quick Crimp Mailing Tube, Crimped Ends, 24 X 2, Brown, 25/Carton $38.13 use Sturdy Brown Kraft Fiberboard Tubes For Storing Or Mailing Artwork, Posters, Maps And More. Just Push Ends Together To Close. No Need For Tape. [QUA46108] UPC: 085227461087 UNSPC: 44121501 11 LB

46120 - Fiberboard Quick Crimp Mailing Tube, Crimped Ends, 36 X 3, Brown, 25/Carton $79.24 use Sturdy Brown Kraft Fiberboard Tubes For Storing Or Mailing Artwork, Posters, Maps And More. Just Push Ends Together To Close. No Need For Tape. [QUA46120] UPC: 085227461209 UNSPC: 44121501 15 LB

IDEAL 33-700 RJ-11, RJ-45 Telemaster Crimp Kit $69.99 Features: For telephone installations Kit includes, Tool for RJ-11(1,2,3 pair) and RJ-45 (4 pair) plugs 10 4-Position, RJ-11 Stranded Modular Plugs 10 6- Position, RJ-11 Stranded Modular Plugs 10 8-Position, RJ-45 Stranded Modular Plugs

Cables To Go RJ11/45 Crimp Tool Stripper 19579 $43.34 MODEL 19579 VENDOR CABLES TO GO FEATURES RJ11/RJ45 Crimp Tool with Cable Strippter For RJ11 (1 2 3 pair) and RJ45 (4 pair) modular plugs. Multifunction telephone tool cuts strips and crimps for easy onthejob onetool application. Steel frame for added durability. Crimps primary modular plug strain relief only.MANUFACTURER WARRANTY:nbsp;nbsp;1 YEAR

46118 - Fiberboard Quick Crimp Mailing Tube, Crimped Ends, 24 X 3, Brown, 25/Carton $60.99 use Sturdy Brown Kraft Fiberboard Tubes For Storing Or Mailing Artwork, Posters, Maps And More. Just Push Ends Together To Close. No Need For Tape. [QUA46118] Recycled UPC: 085227461186 UNSPC: 44121501 11 LB